How to Configure RAID in Windows 11? This article will teach you how to configure RAID in Windows 11. You can use storage pools and storage spaces to do this. Therefore, we are creating and configuring storage pools in Windows 11.
If your computer is low on memory, you can connect multiple hard drives to it. You can use these multiple hard drives individually at will, but you can configure all these multiple hard drives on one hard drive. The same thing is happening on servers now: they combine multiple hard drives into one hard drive, but the configuration is a bit complicated, such as their RAID.
There are many types and additional functions of RAID technologies currently available, and you must understand these technologies to access this link.
The process I showed you in this walkthrough is actually running on a virtual disk. However, you can also use an external hard drive connected to the computer to do this. However, if you are using a desktop computer, you can do this setting, but I might suggest that you check whether the motherboard of your PC supports a RAID controller. Red controller, then you can combine all these drives in the raid controller settings into one hard drive.
You can also perform a clean installation of the Windows operating system on all multiple hard drives as if they were on a single hard drive. Now, if you are using a tower server, then you have RAID technology, that is, the server uses a RAID controller on the motherboard. I have tested it and it is very effective. I am on a tower server Use red 10.
What is RAID?
RAID (Redundant Array of Independent Disks) is a method of storing the same data in different locations on multiple hard drives or solid-state drives to protect the data in the event of a drive failure. However, there are different levels of RAID, and not all levels are designed for redundancy.
How to Configure RAID in Windows 11?
We need to follow the steps below to configure RAID in Windows 11.
Step #1. Connect External HDD or use Virtual HDD
- To create a virtual hard drive, go to the action menu and select Create VHD.
- Click “Browse” and save the VHD to the specific location you want to save, and then enter the desired virtual disk size. In my case, I will accommodate 5 GB of storage space. You need to choose VHDX and dynamic allocation, which is also recommended.
- VHD: It is used in the old operating system. You can create virtual hard disks up to 2 TB.
- VHDX: It can support virtual hard disks up to 64 TB.
- Fixed Size-As the name suggests, it stores a fixed amount of memory on the physical computer. Suppose you create a 10 GB VHD, it will immediately occupy a 10 GB real hard drive.
- Dynamic Expansion-As the name suggests, it will expand its designated storage capacity over time when it is used. For example, if I create 5GB of virtual storage, the real hard disk is about 4MB.
Also, don’t forget that if you want to set up an old Windows 11 storage pool, you will need at least two VHDs. Therefore, I will create 4 VHDs using the same method and the same settings. How many virtual disks you want to create is up to you.
Step 2. Create Storage Pool with the Windows 11 Settings
If you are using Windows 11, you should know that Microsoft moved the storage group from the control panel to Windows settings. However, you can also access the storage pool through the control panel. I believe they will be deleted soon. switchboard. Step 1. To access the storage pool in Windows 11 settings, open Windows Settings> click Storage under System Settings. Storage Room. Step 2: To create a storage pool, click on “Storage Area” and select “Create Storage Pool”. Step #3 After clicking to create a storage pool and space, it will open the settings you need to select the VHD you just created. Also provide the name of the storage group. I am specifying the name of storage group 1.
Step 4. It’s time to configure these storage pool settings. Name, size, and load capacity of the storage space. Also note that the size can be larger than the size of the storage pool. In the screenshot below, you can see four 17.93 GB VHDs. You can increase this number to any size you want. But I will not do this, because it will cause problems during the operation. has flexible settings, now choose two-way mirroring, because this is the safest way to protect your data from loss. Windows 11 has the same flexible settings as Windows 10, but the DualParity of RAID 6 has been added to Windows 11. You need to understand these flexible settings, so I took a screenshot of Windows 10…
Step #5 Now it’s time to assign a label, choose a drive letter, and finally choose a file system. As for the file system, I use NTFS to do it.
Here you can see the storage pool drive and I have inserted some data inside it.
This is how you can Configure RAID in Windows 11? To set up RAID in Windows 11, go to advanced storage settings, create a group, then combine it with the resistance setting, and finally set up the file system, and that’s it.